CARL Robotics exists to facilitate and provide access to a low cost multi use robot platform to encourage design, programming, and engineering in schools.
If you choose to add assembly, you must choose to have us solder it, and include all the 3D printed parts as well. You will receive a robot that includes everything and is ready to go right out of the box!
If you choose to add soldering, we will do all the soldering for you. All you need to do is just assemble everything together. This must be chosen if you would like it assembled.
If you choose to add the 3D printed parts, you will receive the physical parts, not the STL files. All 5 must be chosen if you would like it assembled.
For purchases via a Purchase Order, please contact us at email@example.com
We will also be offering workshops to build and program the CARL robot and in doing so, get an introduction to the wonderful world of Arduinos.
The workshops be roughly 1.5 hours, will cost $50-60 and will include a robot kit to build during the workshop.
If you are interested in taking part in a workshop, please contact us at firstname.lastname@example.org.
Date, time, and place for the workshops will be determined at a later time.
Includes all the following parts:
1 Laser Cut Base Plate
2 TCRT5000 IR Reflectance Sensors
1 170Point Solderless Breadboard
1 4AAA Battery Holder
1 Arduino Nano Mini USB Clone (Soldered and Cable included)
1 Rocker Switch
1 Capacitor for voltage smoothing
1 Sliding Teflon Skid
1 L9110S Motor Driver
2 Geared DC Motors and Wheels
1 Soldering Kit – everything you need to solder the robot
1 Wiring Kit – everything you need to wire the robot
3D Printed Parts Required:
Motor Clips (2pcs)
Motor Driver Holder