Sale!

CARL 5 Robotics Learning Platform

From: $ 25.45 $ 25.04

Solder the CARL 5 robot – optional

Have us do all the soldering for you!

Assemble the CARL 5 Robot – optional

Have us assemble and calibrate it for you!

CARL 5 3D Printed motor clips 2pcs – optional

62 in stock

CARL 5 3D Printed front support – optional

37 in stock

CARL 5 3D printed frame – optional

37 in stock

CARL 5 3D Printed battery holder – optional

16 in stock

CARL 5 3D Printed Motor Driver Holder – optional

20 in stock

Insufficient stock

Category:

Description

CARL Robotics exists to facilitate and provide access to a low cost multi use robot platform to encourage design, programming, and engineering in schools.

 

If you choose to add assembly, you must choose to have us solder it, and include all the 3D printed parts as well. You will receive a robot that includes everything and is ready to go right out of the box!

If you choose to add soldering, we will do all the soldering for you. All you need to do is just assemble everything together. This must be chosen if you would like it assembled.

If you choose to add the 3D printed parts, you will receive the physical parts, not the STL files. All 5 must be chosen if you would like it assembled.

 

For purchases via a Purchase Order, please contact us at mb@a2delectronics.ca

 

CARL Workshops:

We will also be offering workshops to build and program the CARL robot and in doing so, get an introduction to the wonderful world of Arduinos.

The workshops be roughly 1.5 hours, will cost $50-60 and will include a robot kit to build during the workshop.

If you are interested in taking part in a workshop, please contact us at info@a2delectronics.ca.

Date, time, and place for the workshops will be determined at a later time.

 

Includes all the following parts:

1 Laser Cut Base Plate

2 TCRT5000 IR Reflectance Sensors

1 170Point Solderless Breadboard

1 4AAA Battery Holder

1 Arduino Nano Mini USB Clone (Soldered and Cable included)

1 Rocker Switch

1 Capacitor for voltage smoothing

1 Sliding Teflon Skid

1 L9110S Motor Driver

2 Geared DC Motors and Wheels

1 Soldering Kit – everything you need to solder the robot

1 Wiring Kit – everything you need to wire the robot

 

3D Printed Parts Required:

Motor Clips (2pcs)

Motor Driver Holder

Frame

Front Support

Battery Holder